RPM Front Suspension A-Arms Black 70762, GT2, SC10, T4,

RPM Front Suspension A-Arms, 1 pair & Bulkhead, for Associated GT2/SC10/T4 (Black). #70762

Requires: Associated Hinge Pin #7927 (sold separately) for use on SC10/T4

Tech Notes: RPM Front A-arms can be used on the Associated SC10 & T4 although the outer front SC10 / T4 hinge pins will need to be replaced with the outer front hinge pins from the GT2 (Assoc. #7927). Additionally, the upright spacers used on the SC10 / T4 will no longer be needed.
RPM Front A-arms require the use of the bulkhead supplied in the RPM front A-arm kit. Stock bulkheads will not work with RPM A-arms. Please note, RPM GT2 rear A-arms will not work on the SC10 or T4.

Although designed for the Associated GT2 gas truck, these a-arms are a perfect fit for the Associate SC10 and T4. RPM SC10 / T4 / GT2 A-arms were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. Our SC10 / T4 / GT2 front A-arms are designed to withstand some serious abuse! Weve redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a larger area at the inner hinge pin mounts. RPM front A-arms are wider at the inner hinge pin mounts by nearly 3/16 without altering suspension geometry.
We also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms weakens them at that point. We moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening our A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, weve also eliminated the problem of the hinge pins falling out due to varying screw head diameters, which seems to be a rather large problem.

Our final focus was on slop elimination. Our strict quality control allows us to tighten up all of our tolerances without fear of binding the suspension system. The final result smooth, free moving suspension with minimal slop. Our tighter tolerances on our A-arms allows other critical adjustments such as camber and toe angles to be much more consistent, which provides better and more consistent control of the SC10 / T4 / GT2.

RPM A-arms come with all necessary mounting hardware and instructions. RPM SC10 / T4 / GT2 front A-arms are sold in pairs and include a new front bulkhead in the package.